Wing

The Wing combines full 3D control with the precision of a laser mouse.

 

It is designed to meet the demands of Uninhabited Aerial Vehicle (UAV or drone) and Remotely Operated Vehicle (ROV) control, remote manipulation, Computer Aided Design software, Virtual Reality, and simulation or training games. The Wing is ideal for any application requiring the speed and accuracy of a high-end mouse, as well as free-flowing and intuitive 3D interaction.

Functions

Unprecedented freedom of movement from a desk-based control system.

 

The lower part contains the laser mouse sensor; the upper part attaches via a precision slide and pivot mechanism to provide pitch, roll and z-height movement. Further control is then added through the under-slung yaw-bar positioned towards the front, giving a total of six-degrees of freedom.

Features

Each aspect of the Wing is designed to seamlessly transfer movement to the sensors.

Hall Effect Sensors
Three Hall-Effect sensors are used in combination with two neodymium rare-earth magnets. The same sensors are used on sports car throttles or active suspension and offer a resolution much higher than that achievable from a resistance or optical solution.

The signal is combined with that from the laser mouse sensor as a single USB signal, recognisable to the PC as a mouse and 4-axis joystick. This means interfacing software with the Wing is straightforward without proprietary software.
Precision Gimbal Mechanism
The pitch and roll movement is achieved through a pair of gimbals similar to that on a gyroscope mounting. Springs provide a force that securely holds the upper part in the neutral position. This feature is critical in preventing any unwanted movements. This patented features means the mouse functions can be used to control systems without inadvertently effecting the movement of the vehicle.

At the same time, full vehicle control is immediately available without moving from one set of controls
Fully Ball-Raced Axes
Dual ball-bearings are fitted to each axis in order to take full advantage of the sensors. This ensures that all movements from the user are immediately transferred through to the software, UAV, ROV or robotic arm without any loss of accuracy and without unwanted movements.
CNC Machined Components
The principle components are all CNC machined from aluminium.

The fine tolerances of the internal mechanism ensure that even the most delicate movements are transferred directly from the user to the sensors. To our knowledge, the level of precision engineering is unprecedented on this kind of device.

The parts are ceramic anodised to give a scratch resistant and robust finish.
Show More

Applications

The Wing was designed to address the needs of users who require the speed and accuracy of a a high-end mouse for pointing and selection tasks along with full 3D control.

Drone Piloting

The Wing brings together control of system operation, aircraft piloting, and gimbal control on Uninhabited Aerial Vehicles (UAV, UAS, RPAS or drone) into a single unit: One hand is in control of the mouse pointer and manual piloting or camera gimbal control; the other hand is free to operate aircraft systems through the keyboard or custom control panel.

  • Aircraft can be directed simply by pre-defining waypoints and then adjusting them as required during the mission.

  • Integrated 4-axis joystick functionality for simultaneous mission planner operation, camera gimbal control, flight path adjustments, or full manual piloting.

  • Joystick functions recognised by APM Planner 2.0, Ardupilot Mission Planer, DJI Ground Station, and any ground station software that supports standard joystick inputs.

  • Familiar computer mouse shape, speed and accuracy reduces the learning curve allowing the operator to focus on the job rather than piloting the aircraft.

  • Available as part of the Wing GCS or ready to integrate with an independent Ground Control Station

Remotely Operated Vehicle (ROV) Control

ROVs require the control of numerous functions and the Wing is ideally suited to simultaneous control of multiple axes. The internal joystick mechanism offers 4-degrees of freedom for thruster control. Meanwhile, the mouse function can be mapped to the the manipulator arm or other functions. One hand is left free for control of a second joystick or operation of other systems.

 

Remotely Operated Vehicle (ROV) Control

  • Direct control of pitch, roll and yaw through the Wing’s internal joystick function.

  • Proportional mapping of the manipulator arm through the mouse pointer for accuracy and speed beyond what is possible with a joystick.

  • Joystick axes are fully ball-raced and the non contact sensors do not drift or wear.

  • We can integrate the Wing with most control systems, or offer it as a standalone control console as with Wing GCS for where there is no control room available.

  • Controls can be mapped to ROV functions as required

Virtual and Augmented Reality

  •  3D interaction capabilities that complement immersion in the virtual world.

  • It can also be used for full control of both view and movement but without the constraints of a headset.

  • None of the fatigue problems associated with gesture-based systems.

Computer Aided Design (CAD) Software

The Wing provides the user with one-handed control the cursor with the precision of of a high-performance mouse and simultaneous control of the view. The other hand is free for entering dimensional information or for keyboard commands.

 

Careful design of the internal spring-loaded gimbal means each movement direction has a clearly defined centre-point and can be control discretely or in combination without inadvertently making slight adjustments in an unintended direction. This is not possible with a ball or floating-spring type of 3D mouse.

© 2019 Worthington Sharpe Ltd.

  • Worthington Sharpe Videos
  • Worthington Sharpe twitter feed
  • Facebook - Grey Circle
Fully Ball-Raced Axes

Dual ball-bearings are fitted to each axis in order to take full advantage of the sensors. This ensures that all movements from the user are immediately transferred through to the software, UAV, ROV or robotic arm without any loss of accuracy and without unwanted movements.